So I’ve had this idea for quite a while and finally the folks over at Gnome Stew threw up this little post and I finally got off my butt and made some simple and inexpensive Dungeon Terrain.
Here’s the materials list:
3/4 inch x 3/4 inch (That’s about 2 CM x 2 CM) square doweling (I got three 3 foot pieces, so that’s 9 feet of wall and it cost only about $7.50).
Spray Primer (Already had in the garage but should only cost a couple of bucks.)
Gray and Black paint (Once again, I already this laying around but only a couple of bucks more.)
Clear Acrylic Spray Coat (Yes, I have a lot stuff around the garage but only a couple of bucks more.)
Depending on good your selection of local home improvement stores is, you’ll probably spend between $15 and $20.
1. Cut the dowels into conveint lengths. (I did 1 inch for doors, then 2, 3, 4, 5 and 6 inch lengths.)
2. Sand down any rough spots.
3. Prime it.
4. Paint it.
5. Seal it. And you are done.
I decided to go with 3/4 inch for a couple of reasons. One there was a huge price difference between 3/4 and 1 inch. Also, I wanted the walls to be shorter than the miniatures. There’s always one person who won’t lean forward or stand up to see that “hidden” orc behind the wall in front of them.
You can paint as much detail as you want. I just went with a simple gray and then painted black lines every inch or so. I’m not that exact when it comes to laying out dungeons. It’s just one of those things that I think “close enough” is good enough.
Another cool thing you can do is make stairs with the various lengths.
So there you go. Some inexpensive, durable, easy to make and light weight dungeon terrain.